Price:

3 Lt Aluminium Tank 3 port - Silver

170(h) x 210(w) x 460(L)

TECHNICAL TIPS: Compressors 

• Low voltage supply causes amp spikes, which can damage your compressors motor

• Always use a pressure switch that will shut off the compressor at or before its maximum working pressure, never use adjustable pressure switches, they will allow your compressor to exceed it's maximum working pressure

• Make sure that your engine is running while you are running your air compressors, to ensure your air compressors are getting enough supply voltage

• Compressors should be mounted as close as possible to the battery to keep the positive wire as short as possible and amp draw to a minimum

• Safety valve pop-off valve pressure should be at 25psi higher than the cut off pressure of your pressure switch, safety valves will begin to bleed at up to 15psi below safety valves rated pressure

• Always operate compressors below the maximum pressure rating of the compressor according to each compressors specifications

• Choose a compressor mounting location that is cool as possible and away from heat sources, this will help the compressor run cooler and last longer

• Always install compressors higher than the air reservoir tanks intake port to keep moisture from leaking into the compressor's head